V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Previous | 2 / 2 | Next |
Order No. | |||
FMT-W30C5 | FMT-W30K1 | ||
Capacity F(nom)* | N | 500 | 1000 |
Resolution** | N | 0.5 | 1 |
Tolerance** | % F(nom) | 0.5 | |
Temperature coefficient | %/ K | 0.02 | |
Reproducibility*** | %F | 0 | |
Repeatability* | %F | 0.3 | |
Hysteresis*** | %F | 0 | |
Max. operating force* | % F(nom) | 120 | |
Measurement error** | % F(nom) | 1 | |
Breaking force* | % F(nom) | 150 | |
Nominal deflection* | mm | 0.15 | 0.25 |
Display | Type | LCD, 5 digits, 14mm high | |
Measuring principle | Force sensor with full-bridge strain gauge and high-speed μ-processor | ||
Measuring rate | Hz (Peak) | ~ 1.000 | |
Memory | Statistics memory with display of the mean, maximum, minimum and standard deviation for 1000 measurements | ||
Cable diameter | mm (slot width) | 0.5 | 0.8 | 1.0 | 1.3 | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 5.0 | 6.0 | |
mm (clamping device) | 0.1 – 6.0 | ||
Cross section | Range IEC 60352-2 | 0.05 - 4mm2 (AWG 10 - 30) | 0.05 - 6mm2 (AWG 8 - 30) |
Range SAE AS7928 II | AWG 14 - 30 | AWG 10 - 30 | |
Min. cable length | mm | 70 | |
Power supply | Type | Solar cell or via USB interface with connected PC | Optionally with USB power supply | |
Interface | USB 2.0 | Optional software FMT-W_Connect | |
Adm. temperature | Operation (°C) | 0 - 40 | |
Stocking (°C) | -5 - 60 | ||
Weight | kg | 14.0 | |
Dimension (LxWxH) | mm | 350 x 160 x 75 | |
Material | Anodised aluminum, surface hardened steel, stainless steel V2A |
available in | ||