V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
TS/6-63BP100 PreMoist Hygiene Swab | Technical Service Consultants by Muser
| Previous | 7 / 8 | Next |
Technical Service Consultants TS/6-63BP100 PreMoist Hygiene Swab
Pre-moistened Foam Tip Swab TSC Neutralising Buffer, white polystyrene breakpoint (at 65mm) shaft. Supplied in tube only.
Pre-moistened Foam Tip Swab TSC Neutralising Buffer, white polystyrene breakpoint (at 65mm) shaft. Supplied in tube only.
Description
Pre-moistened Foam tip swab in TSC Neutralising Buffer, white polystyrene breakpoint (at 65mm from tip) shaft. Supplied in tube only. Breakpoint included for convenient sample removal, transfer to smaller vials & further analysis.
Recommended For
Hygiene surveillance (HACCP) and environmental monitoring of most surfaces where chemical residue neutralisation is desired. Foam tip offers enhanced sample collection and release.
- Foam tip offers enhanced sample collection and release
- Breakpoint for easy sample analysis
- Easy to break off into vial
- No swab cap once broken, so stops the stomacher bag getting damaged, potentially affecting sample count
Ideal For
Whole sample analysis, as all sample is contained on swab. Food security from 'farm to fork' scenarios, including TACCP validation. Breakpoint may not be suitable in food preparation areas.
Known Limitations
- Analyse as soon as possible due to the small volume, so to minimise sample dry out and organism loss. Refrigeration will stabilise recovery of some organisms.
- Not suitable for most fastidious organisms unless analysed immediately. Unsuitable for certain sample areas due to inclusion of breakpoint.
- To maintain best practice, it’s recommended that sampled surfaces are wiped after sampling.
Shelf Life
24 months.
Sterilisation Method
Gamma Irradiation to achieve a SAL of 10-6.
Technical Specifications
| Code | Name | Colour | Length | Quantity | Pack size | No. in case | Shelf life |
| TS/6-63BP100 | PreMoist Hygiene Swab | n/a | n/a | 1 | 100 | n/a | 24 months |
Downloads
