V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
FMI-S50 Force Gauge | Alluris by Muser
| Previous | 9 / 11 | Next |
Alluris FMI-S50 Force Gauge
Features
- Comprehensive test analysis software package for recording and extensive evaluation of test results
- Target-actual comparisons of force-displacement curves with freely definable good / bad ratings
- Application as force sensor in test stands >> with rugged aluminium die cast housing, optimized fixing points and autoreverse display
Description
Digital Force Gauges FMI-S50 series are made for precise force measurements in materials testing and quality control. Combined with a laser distance sensor and manual or motor-driven test stands they can be upgraded to a comprehensive measurement system for all push and pull test requirements.
The sensor modules are integrated in robust die cast aluminium housings and directly connected to each other. Force is applied through a gauge rod with M6/M10 thread. The laser distance sensor allows a non-contact measurement on the test object or on a reference mark.
Measurement values are captured in real time and transferred to the PC. The software FMI_Analyze allows different ways of visualization, both automatic and manual starting and comparison with setpoint limits or graphic parameters (e.g. failure lines or measurement value windows).
The sensor modules are integrated in robust die cast aluminium housings and directly connected to each other. Force is applied through a gauge rod with M6/M10 thread. The laser distance sensor allows a non-contact measurement on the test object or on a reference mark.
Measurement values are captured in real time and transferred to the PC. The software FMI_Analyze allows different ways of visualization, both automatic and manual starting and comparison with setpoint limits or graphic parameters (e.g. failure lines or measurement value windows).
Technical Specifications
| Order No. | ||||||||||
| FMI-S50A5 | FMI-S50B1 | FMI-S50B5 | FMI-S50C1 | FMI-S50C2 | FMI-S50C5 | FMI-S50K1 | FMI-S50K2 | FMI-S50K5 | ||
| Capacity F(nom)* | N | 5 | 10 | 50 | 100 | 250 | 500 | 1000 | 2500 | 5000 |
| Resolution** | N | 0.001 | 0.002 | 0.01 | 0.02 | 0.05 | 0.1 | 0.2 | 0.5 | 1 |
| Tolerance** | % F(nom) | 0.15 | ||||||||
| Temperature coefficient* | %/K | 0.02 | ||||||||
| Reproducibility* | %F | 0.03 | ||||||||
| Repeatability* | %F | 0.03 | ||||||||
| Hysteresis* | %F | 0.075 | ||||||||
| Creeping (5min)* | %F | 0.15 | ||||||||
| Measurement error** | % F(nom) | 0.3 | ||||||||
| Measuring principle | Bidirectional force sensor with strain gauges and high-speed μ-processor | |||||||||
| Nominal deflection* | mm | 0.17 | 0.34 | 0.13 | 0.25 | 0.23 | 0.17 | 0.34 | 0.13 | 0.26 |
| Measuring shaft | M6 | M10 | ||||||||
| Max. operating force* | % F(nom) | 120 | ||||||||
| Breaking force* | % F(nom) | 500 | 200 | |||||||
| Display | Type | 5-digit LCD | 12mm | Autoreverse | ||||||||
| Refresh time (ms) | 10 ... 1000 | |||||||||
| Operation modes | Regular | N | kg | lb | ||||||||
| Peak (real-time) | Display of peak value | Peak value of pull- or push force (drag indicator function) | |||||||||
| Limits + Statistics | 2 separately adjustable limits | Single value memory and continuous measured value memory | |||||||||
| Power supply | Type | Solar cell | USB (max. 900 mA) | ||||||||
| Connection | USB (socket) | |||||||||
| Temperature (operation)* | °C | 0 ... 40 | ||||||||
| Protection code (EN 60529) | Cable not plugged | IP40 | IP65 | |||||||
| Housing | Material | Aluminium die cast | Hardened steel | |||||||
| LxWxH (mm) | 150 x 82 x 29 | |||||||||
| Weight (kg) | 0.480 | 1.150 | ||||||||
| Mounting | 2xM4, 2xM5, adjusting holes D5(H7) | |||||||||
*) according VDI/VDE/DKD 2638 at 0,2 ...1 x F(nom)
** ) according DIN 1319-1
Scope of Supply
Force gauge with force introduction parts (hook, flat head, groove head, pressure cone), USB cable, Quickstart manual, transport and protective case. Including FMI_Analyze software for real-time data acquisition Force/Distance/Time. Including calibration protocol according to VDI/VDE 2624 sheet 2.1 (DAkkS accredited calibration laboratory).
Downloads
Product Video
