Visit
Official Website

Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468

Testo 835-H1 - Infrared Thermometer plus Moisture Measuring [Delivery: 3-5 days subject to availability]

Previous 14 / 17 Next

Quantity
Add Quotation


testo 835-H1 - Infrared Thermometer plus Moisture Measuring
 
  • Measure temperature, moisture and dew point with only one device
  • Calculate the surface moisture content
  • Easy and comfortable to use: easy-to-follow menu guide, can save up to 200 readings, data analysis with free-to-download software
  • Four-Point-Laser and 50:1 Optics for precise measurements even over long distances
Non-contact temperature and moisture measurements – with only one device. The testo 835-H1 infrared thermometer not only measures the temperature but has an intergrated moisture sensor that allows you to measure moisture too.
 
 
Product Description
 
Perform temperature and moisture measurements on walls, monitor and check air conditioning and ventilation systems, service and inspect industrial systems, ensure that constantly high levels of quality in production processes are maintained: the testo 835-H1 is the ideal all-round device for a wide range of industrial and commercial applications.
 
 
What the testo 835-H1 infrared thermometer plus moisture measuring can do
  • Measure the surface temperature and relative humidity and check the dew point and surface moisture
  • Help to detect mold in buildings before it’s too late
  • Carry out measurements on small, moving or hard-to-reach objects accurately and safely
 
Benefit from state-of-the-art technology and easy handling
  • 4-Point-Laser: shows the exact measuring zone, effectively preventing wrong measurements
  • 50:1 optics that provide you with excellent surface temperature measurements even over greater distances (distance 5 m  = 10 cm measurement spot)
  • Adjustable degree of emission for measuring a wide variety of different surfaces
  • Connectivity for temperature sensors: for additional contact measurements for materials with low degree of emission possible – simply connect your optionally available temperature sensor
  • Easy-to-use, easy-to-follow menu guide thanks to icons and joystick
  • Generate measuring points and save up to 200 measurements
  • Define individual alarm thresholds, acoustic and optical alarm
  • Show min/max values
  • Backlit display
 
Delivery Scope
 
testo 835-H1 infrared thermometer plus moisture measuring function and 4-Point laser marking, measurement data management, moisture module, batteries, calibration protocol.
 
 
Technical Data
 

Temperature - TC Type K (NiCr-Ni)
Measuring range -50 to +600 °C
Accuracy ±(0.5 °C + 0.5 % of mv)
Resolution 0.1 °C
 
Temperature - Infrared
Measuring range -30 to +600 °C
Accuracy ±2.5 °C (-30.0 to -20.1 °C)
±1.5 °C (-20.0 to -0.1 °C)
±1.0 °C (0.0 to +99.9 °C)
±1 % of mv (Remaining Range)
Infrared resolution 0.1 °C
 
Humidity - Capacitive
Measuring range 0 to 100 %RH
Accuracy ±2 %RH
±0.5 °C
Resolution 0.1 °C
0.1 %RH
0.1 °Ctd
 
General technical data
Dimensions 193 x 166 x 63 mm
Operating temperature -20 to +50 °C
Housing ABS + PC
Emissivity table 20 values
Laser spot on / off
Standards EN 61326-1:2006
Warranty 2 years
Alarmsignal audible; Optical
Auto-off backlight 30 s*
Auto-off instrument 120 s*
Battery type 3 batteries type AA (or USB operating with PC-Software)
Battery life 25 h (typical 25°C without laser and backlight) 10 h (typical 25°C without backlight)
Display type Dot Matrix
Memory 200 measuring values
Storage temperature -30 to +50 °C
Weight 514 g
*disabled for continuous measurement and USB connection
 
 
Applications
 
Location of thermal bridges and mould formation
 
With the testo 835-H1, you can identify thermal bridges (places on walls, floors and ceilings where there is a greater outflow of heat than at points nearby, mainly due to structural defects) for early detection or identification of structural defects, energy loss and places where there is a risk of mould formation. 
 
Advantages of the testo 835-H1:
  • Fast detection of thermal bridges by scanning the walls, even at great distances
  • Measurement of the dewpoint, dewpoint distance and aw value (surface moisture) to assess conditions of the room and wall
  • Saving the data for documentation and comparison with previous measurements in order to evaluate corrective measures
 
 
 
Downloads
 
Product Brochures

Product brochure testo 835  (PDF, 1.108 KB)
 
Manuals

Instruction manual testo 835  (application/pdf, 2.024 KB)
Instruction Manual - PC-Software - Testo EasyClimate  (PDF, 3.1 MB)
Short manual testo 835  (PDF, 849.9 kB)
 


Video Demo


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

You have 0 items in you cart. Would you like to checkout now?
0 items
available in