V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
Comark PDQ400 | Waterproof Pocket Digital Thermometer | -20＜C to 200＜C [Delivery: 3-5 days]
| Previous | 1 / 5 | Next |
Comark PDQ400 | Waterproof Pocket Digital Thermometer
SKU: 3807774
The PDQ400 Waterproof Pocket Digital Thermometer with Thin Tip Probe is compact and slim and has a thin probe tip for fast response. The 1.5mm probe is ideal when chefs check the temperature of thin foods like burgers. The PDQ400 Thermometer is waterproof so ideal for use in busy, steamy kitchens and can also be used to check commercial dishwasher cycles.
There is also a handy data hold feature on this Pocket Digital Thermometer which enables the user to temporarily hold the digital reading on the screen while they note a measurement.
The PQ400 Waterproof Pocket Digital Thermometer has a protective case for safe storage and transportation.
Features
There is also a handy data hold feature on this Pocket Digital Thermometer which enables the user to temporarily hold the digital reading on the screen while they note a measurement.
The PQ400 Waterproof Pocket Digital Thermometer has a protective case for safe storage and transportation.
Features
- Accuracy ±0.5ºC / ±1ºF
- Waterproof
- Thin tip probe
- Response in under 6 seconds
- Extended range -20º to +200ºC / -4º to +400ºF
- Auto power off
- Maximum temperature hold
- Slim profile fits flat in pocket
- Data hold to freeze a reading
- Withstands constant use in wet or humid conditions
- NSF
- Field Calibratable
- BioCote® anti-microbial protection
Field Calibration Procedures
Follow the instructions below to check the calibration of your PDQ400 Waterproof Pocket Digital Thermometer
- The thermometer is only calibratable in slush ice solution (60% crushed ice and 40% tap water) or a water bath. Do not attempt to calibrate in any other manner.
- Immerse the stem of the thermometer to at least half length in the slush ice solution.
- Wait for the reading to become stable (usually ±1° of 0°C / ±2° of +32°F).
- Press and hold the CAL button for 8 seconds to begin calibration.
- CAL will be displayed for two seconds and calibrate at 0°C / +32°F is completed.
- Remove the thermometer from the ice water and continue to take measurements.
Note: CAL will be displayed any time the CAL key is pressed for 7 seconds, but the thermometer will not be re-calibrated unless the top is inserted in ice.
Technical Specifications
Technical Specifications
| Name | Value |
|---|---|
| Temperature Measurement Range | -20°C to +200°C / -4°F to +400°F |
| Accuracy | ±0.5°C / 1°F |
| Sampling Time | 1.5 seconds |
| Response | Under 6 seconds |
| Probe Tip Diameter | 1.5mm |
| Waterproof | Yes |
| Scales | °C/°F |
| Battery Type | 1.5 V Button Cell battery (LR44) |
Documentation
| Description | Issue No |
|---|---|
| Technical Datasheet (PDQ400) | 01 |
| PDQ400 Packaging Slide Card | 01 |
| Measuring and Monitoring in the Food Industry | 02 |
How-To Videos
Slush Ice Thermometer Calibration
