V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
Comark C9551 - Dry Use Pressure Meter 0 to ¡À 140mbar [SKU 3059286]
| Previous | 2 / 4 | Next |
Comark C9551 - Dry Use Pressure Meter 0 to ± 140mbar
The Comark C9551 Dry Use Pressure Meter 0 to ± 140mbar combines high accuracy with speed of response and is designed to function between 0 to ±140mbar, with twin inputs for gauge or differential pressure measurement.
- Pressure Measurement Range – 0 to ±140 mBar
- Twin Inputs for Gauge or Differential Pressure
- Connections: 1/8″ BSP female
With a durable design to survive an industrial setting, it is dust and waterproof to IP67 Standard (BS EN 60529), and an optional protective rubber boot is also available.
Supplied with free tubing and connectors.
Supplied with free tubing and connectors.
- Connector 1/8″ BSP Female
- Measurement Range 0 to ± 140mbar
- Environmental Protection IP67, BS:EN60529, IEC529
- Selectable pressure units: PSI, mbar, inH2O, mmHg, torr, Pa, mmH2O
- Silicone protection option for liquid pressure measurement
- Adjustable zero value
- Maximum, minimum pressure and hold function
- Averaged reading function
- Over-range indication – maximum over/under pressure 6PSI/400mbar
- Selectable auto switch off
Supplied with:
Pressure Tubing and Connectors designed for use with C95xx Pressure Meters. Contains 4 x 1/8″ BSP Nylon Washers, 1.4m Polyurathane Tube SP Blue, 2 x Male Stud Coupling c/w Washer.
Technical Specifications
| Name | Value |
|---|---|
| Pressure Measurement Range | 0 to ±140 mBar (See manual for other ranges) |
| Resolution | 0.1mBar |
| Accuracy | ±0.2% of full scale (FS) at +23°C |
| Repeatability | ±0.1% of full scale (FS) at +23°C |
| Mean Temperature Coefficient of Reading | <0.1% per °C |
| Operating Range | 0 to 50°C, 10 to 90% RH non-condensing |
| Environmental Protection | IP67, BS:EN60529, IEC529 |
| Battery | *9V PP3 6F22 — MN1604 UCAR9V |
| 125 hours (using MN1604) | |
| *Non-IS Models Only. IS models must only use Zinc Chloride Battery | |
| Low Battery Warning | Displays BAT just before end point of battery |
| Over Pressure Indication | – – – – |
| Over 9999 Reading Indication | Lowest 4 digits blink |
| Connections | 1/8" BSP female |
| Weight | 330gm including battery |
Documentation
| Description | Issue No |
|---|---|
| Measuring and Monitoring Temperature within Healthcare and Industry | 01 |
| Pressure Meters Datasheet | 01 |
| C9500 Series Operating Instructions | 14 |
