Visit
Official Website

Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468

MAS-100 NT Industrial Microbial Air Sampler

Previous 2 / 3 Next

Quantity
Add Quotation


Merck 109191 MAS-100 NT

The industry standard for viable air sampling

 

The MAS-100NT® portable microbial air samplers are the industry standard for use in critical environments. These compact yet sophisticated devices are the preferred choice for those demanding the highest quality in microbial air monitoring.

The MAS-100NT® systems feature a new 300-hole perforated lid for increased collection efficiency and impaction speed. Both systems utilize standard 90 – 100 mm agar plates or can be adapted to fit 55 – 60 mm contact plates allowing for a low consumable cost and greater flexibility.

Sampling at 100 litres per minute, these systems have the highest airflow accuracy available at ± 2.5 %, compared to others that can be as high as ±10 %. The integrated flow sensor allows the user to freely interchange the perforated lids without affecting the accuracy or the calibration of the unit. Sampling volumes are also easily configurable between 1 and 2,000 litres.

The units have an impact velocity of 19.6 meters per second equivalent to Anderson 6 and isokinetic flow rate that will not produce turbulence in a laminar flow environment. The new SQS function will allow for smaller sampling volumes over longer periods of time, up to 50 sequences over 24 hours.

The new MAS-100NT® systems are controlled using a new menu driven, larger illuminated display allowing for quicker navigation. A programmable start delay of up to 60 minutes allows for personnel to be out of the sampling area when the sampling starts and a new audible alarm indicating the interruption of a sampling.

 

Advantages

  • Compact design
  • Improved security features and enhanced connection possibilities
  • Very easy to handle
  • Hardware and software developed according to GAMP 4
  • Fully validated system using ICR plates
  • Improved communication (including RS-232 and USB ports)
  • Alarm and sample log records of the last 100 events can be exported or printed at any time
  • Mass flow is measured and ensures a flow of 100 LPM
  • Validated according to the EN ISO 14698 standard
  • Fully meets the d50 requirements using the 300 x 0.6 mm sampling head

 

Technical Specification

Feature

Specification

Height

25 cm

Diameter

11 cm

Weight

2.38 kg

Material

Anodized aluminum

Nominal Airflow

100 SLPM ±2.5 % (standard litres per minute)

Pre-set sampling volumes

50, 100, 250, 500 and 1,000 litres

User defined sampling volume range

1 to 2,000 litres, in increments of 1 liter

Battery pack

Li-ion, rechargable battery pack

Charging time

Full recharge time approx. 3.5 hours

Running time

Total running time up to 7 hours

Total aspiration volume

Approx. 42,000 liters

Motor

6 V

Display

Backlit liquid crystal display

Battery

RTC (Real Time Clock) battery; lifetime of approx. 10 years

Driving motor

PWM (Pulse Width Modulation) frequency for driving motor

Airflow regulation

Hot wire anemometer, numerical control, temperature and pressure sensors

CE approval

Emission: EN 61326-1:2006, EN 55011:1998+A1:99
Immunity: EN 61326-1:2006, EN 61000-4-2:1995 + A1:98 +A2:01, EN 61000-4-3:2002, EN 61000-4-4:1995 + A1:01 +A2:01, EN 61000-4-5:1995 + A1:01, EN 61000-4-6:1996 + A1:01, EN 61000-4-8:1993 + A1:0

Power unit / battery charger

110-240 V, 50-60 KHz

Data exchange

USB interface

 

Downloads

 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

You have 0 items in you cart. Would you like to checkout now?
0 items
available in