Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
+603-2742 7469

Leica | DISTO S910

Previous 1 / 8 Next

Quantity
Add Quotation


Leica | DISTO S910
 
The Leica DISTO S910 is the first LDM that captures multiple, accurate measurements in three dimensions from a single location, radically improving the efficiency of common measuring tasks.
 
 
SmartBase
 
Smart Base -- a biaxial pivot integrated with the circuit board -- is the key hardware innovation. Combined with a more powerful laser, a 360° tilt sensor, and new software --SmartBase enables the S910 to measure the distances and angles between multiple points.
 
SmartBase facilitates three new remote measurement  functions:
  • Point to Point (P2P): Measure the tie distance between two points, even if you are hundreds of feet from your target. Shoot Point 1 then Point 2 and the S910 displays the distance between them. Widths, heights, diagonals, gaps, it doesn't matter: Just measure the start and end point and the distance is displayed.
  • Smart Area: Shoot the corners of any polygon to determine the area of walls, floors, even complex roof shapes. 
  • Smart Angle: Shoot three points to measure any angle (including outside angles, which is a first). 
 
Use a Tripod

For maximum accuracy the SmartBase requires a simple level check. This guarantees the electronic level of the S910 is within ± 0.1° of true level. For the highest measuring accuracy you will want to use a tripod for the majority of P2P, Smart Angle and Smart Area functions.  The S910 includes a metal insert for a ¼” tripod thread, found at the bottom of the SmartBase (and a 5/8” adaptor is available).
 
 
Even with a tripod and outdoor pointfinder camera, placing your laser point exactly where you want it can be challenging, especially at longer distances. The 
FTA 360-S is a micro-adjustable tripod adaptor. Point and shoot to get close, then tweak the knobs ever so slightly to adjust your spot by millimeters.
 
 
Capture and Export Measurement Data
 
The S910 connects to compatible mobile apps with Bluetooth and exports DXF files over WiFi. 
 
 
Features and Functions
  • Accurate to within 1mm
  • DXF (and JPG) Exports
  • Bluetooth Smart (4.0)
  • Smart Horizontal Mode
  • Touchscreen laser distance measures
  • Battery recharged via a mini-USB
  • Smart Horizontal Mode
  • Min / Max Function - Useful for accurate diagonal room or window/door measurements
  • Area Mode (Determines the area of a rectangle or square in two shots) / Volume Mode (Adds third vertical shot to calculate volume)
  • Triangle / Room - The DISTO will tell the circumfrence and the angle of the triangle
  • Painter Function - When the DISTO is in area or volume mode, add / subtract function to total up the are of several surfaces, or subtract an area
  • Pythagoras Functions - Take indirect height and width measurements
  • Trapezium Function - Useful for determining the length and slope of a roof section, and the area it covers.
  • Sloped Object Measurement - Indirect distance measuring between two points
  • Height Tracking - Perfect for measuring the height of an overhead wire
  • Height Profile Tracking - Measure slopes with multiple shots
  • Stake Out Function - Uses the continuous measurement mode to indicate where to place stakes along a stake-out line




Specifications
 
ISO 16331-1 certified measuring accuracy (favorable conditions) 1.0mm / ± 0.04 in*
ISO 16331-1 certified measuring accuracy (unfavorable conditions) 2.0mm / ± 0.08 in**
ISO 16331-1 certified range (favorable conditions) 0.05m - 300m / 0.16 ft - 984 ft
ISO 16331-1 certified range (unfavorable conditions) 0.05m - 150m / 0.16 ft - 492 ft
Smart Base vertical range -40° to 80°
Smart Base vertical sensor tolerance up to +/- 0.1°
Smart Base horizontal range 360°
Smart Base horizontal tolerance up to +/- 0.1°
Tolerance P2P function?at distances (combination of sensors and distance measuring) approx. :
+/- 2 mm / 2 m+/- 5 mm / 5 m +/- 10 mm /10 m
Measuring units 0.000 m, 0.0000 m, 0.00 m, 0.00 ft, 0'00" 1/32, 0.00 in, 0 in 1/32
X-Range Technology Yes
Pointfinder with 4x zoom Yes
Overview camera Yes
File format .jpg / .dxf
Memory Last 50 displays
Windows Software DISTO Transfer with AutoCAD® plugin
Free App iOS / Android
Data interface Bluetooth® V4.0 Smart / WLAN / USB
Measurements per set of batteries ~ 4000
Storage Temp. Range -25 to 60 °C -13 to 140 °F
Operating Temp. Range -10 to 50 °C 14 to 122 °F
Charging Temp. Range -10 to 40 °C 14 to 104 °F
Batteries Li-ion rechargeable
Tripod thread -20
Protection class IP 54 - splash water/ dust proof
Dimensions 61 x 32 x 164 mm / 2.4 x 1.3 x 6.5 in
Weight with batteries 8.5 oz
EAN/UPC 7640110695746
 
 
Support Documents and Downloads
 
Video Demo

Leica DISTO™ S910 – 3D measuring revolution


 
Unboxing Leica DISTO S910
 


 
How to use DISTO S910 P2P Function
 



Leica DISTO™ S910 – How to set up laser measurer on FTA360-S and TRI 70


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

brands
You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in