V Office 2, VO2-03-12,
Lingkaran SV,
Sunway Velocity,
Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
Previous | 4 / 4 | Next |
MC95 Carry Case for Pressure Meters which has been specifically designed for C95xx Pressure Meters with space for the accessories, such as tubing and connectors. | |
Pressure Tubing and Connectors designed for use with C95xx Pressure Meters. Contains 4 x 1/8″ BSP Nylon Washers, 1.4m Polyurathane Tube SP Blue, 2 x Male Stud Coupling c/w Washer. |
Name | Value |
---|---|
Pressure Measurement Range | 0 to ±7000 mBar (See manual for other ranges) |
Resolution | 0.1mBar |
Accuracy | ±0.2% of full scale (FS) at +23°C |
Repeatability | ±0.1% of full scale (FS) at +23°C |
Mean Temperature Coefficient of Reading | <0.1% per °C |
Operating Range | 0 to 50°C, 10 to 90% RH non-condensing |
Environmental Protection | IP67, BS:EN60529, IEC529 |
Battery | 9V PP3 *6F22 — 6F22REL or GP1604G |
125 hours | |
*IS models must only use Zinc Chloride Battery | |
Low Battery Warning | Displays BAT just before end point of battery |
Over Pressure Indication | – – – – |
Over 9999 Reading Indication | Lowest 4 digits blink |
Connections | 1/8" BSP female |
Weight | 330gm including battery |
available in | ||